Please use this identifier to cite or link to this item: https://geoscience.nt.gov.au/gemis/ntgsjspui/handle/1/70888
Export to Endnote
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKenneth McMahon and Partnersen_US
dc.date.accessioned2013-10-23T17:48:14Z-
dc.date.issued1967en_US
dc.identifier.govdocCR1967-0004en_US
dc.identifier.urihttps://geoscience.nt.gov.au/gemis/ntgsjspui/handle/1/70888en_US
dc.description.abstract1. During the period December, 1966 to June, 1967, geological mapping, geochemical stream sediment and rock sampling, induced polarization and magnetic geophysics and finally a rotary percussion drilling programme were completed within the companies Authorities to Prospect No 1584, 1585, 1691, 1714 and 1716 of 502 square miles located in the Ringwood - Limbla area east of Alice Springsen_US
dc.description.abstract2. The geology of the area consists of Archaean Arunta Complex rocks unconformably overlain by the Upper Proterozoic, Heavitree Quartzite, Bitter Springs Limestone Areyonga and Pertatataka Formations and Cambrian Pertaoorrta. Group. These rocks have been folded along north and north trending axes to yield a type of Basin and dome, structure complicated by later faulting along similar north and north directionsen_US
dc.description.abstract3. Bedded base metal mineralization has been discovered in five different stratigraphic horizons from the top of the Bitter Springs Limestone to the Waldo Pedlar member of the Pertatataka formationen_US
dc.description.abstract4. After attempting stream sediment geochemistry which was unsuccessful, prospecting methods have been to follow out stratigraphic zones containing known mineralization and teat them in favourable areas by means of geological mapping, rock sampling geochemistry, and geophysics along reconnaissance lines; finally drilling the most interestingen_US
dc.description.abstract5. In the Line E area results of this work have disclosed a 100 foot thick zone of grey dolomitic siltstones of the Ringwood Member which carry lead and zinc mineralization The best intersection checked by chemical assays yielded 0.38% Pb over a true thickness of 25 feet. As the whole sequence does not outcrop on the surface, gives a definite low order IP anomaly, and is open both down dip and to the west and south it still has considerably potentialen_US
dc.description.abstract6. In the Line X area disseminated bornite and chalcocite mineralization in a zone up to 16 feet thick and 3000 feet along strike is associated with grey dolomites of the Bitter Springs limestone directly overlying intermediate volcanics. However, drilling here has shown that the mineralized grey dolomite intertongues with barren red argillites both down dip and along strike so that the beds never reach economic proportionsen_US
dc.description.abstract7. In the Line L-M Area a high order IP anomaly, occurring in the Areyonga Formation, tested by drilling was shown to be associated with carbonaceous pyritic shale of no economic importanceen_US
dc.description.abstract8. In the Line G Area a low order I anomaly and minor malachite mineralization lies in the same stratigraphic position as the Line X mineralization Unfortunately two holes failed to penetrate the zones of interesten_US
dc.description.abstract9. In the A-D Area high geochemical values and possibly low order IP anomalies were associated with grey dolomite interbedded with red shales at the top of the Ringwood Member. However the grey mineralized beds were considered to be too narrow and widely apart to form an economic thicknessen_US
dc.description.abstract10. On Line P two low order IP anomalies do not appear to be of any major interesten_US
dc.description.abstract11. Lines H, N, R, T and D disclosed nothing of interesten_US
dc.description.abstract12. Therefore the only area where additional work is warranted is in the Line E area where such work is recommendeden_US
dc.subject.classificationBase metalsen_US
dc.subject.classificationIP surveysen_US
dc.subject.classificationRock chip samplingen_US
dc.subject.classificationStream sediment samplingen_US
dc.subject.classificationGeological mappingen_US
dc.titleResults of prospecting operations in the Ringwood area, NT.en_US
dc.relation.isatmap100Pellinore 5849en_US
dc.relation.isatmap100Todd 5949en_US
dc.relation.isatmap100Fergusson Range 5850en_US
dc.relation.isatmap100Limbla 5950en_US
dc.relation.isatmap250Alice Springs SF5314en_US
dc.relation.isatgeolprovinceAmadeus Basinen_US
dc.description.geochemicalsamplingstream sediment, rock chips, downhole assaysen_US
dc.description.drillingrotary percussion drillingen_US
dc.description.mineprospectnameRingwooden_US
dc.identifier.tenureAP1585en_US
dc.identifier.tenureAP1584en_US
dc.identifier.tenureAP1716en_US
dc.identifier.tenureAP1678en_US
dc.identifier.tenureAP1740en_US
dc.identifier.tenureAP1714en_US
dc.description.modifyhistory02/10/2003en_US
dc.description.modifyhistory27/03/2008en_US
dc.description.modifyhistory31/10/2016en_US
dc.description.modifyhistory02/10/2023en_US
dc.contributor.holderAustralian Geophysicalen_US
dc.identifier.collectionnameMinerals Exploration Reports (MEX)en_US
dc.identifier.govdocprefixCR1967en_US
local.flag.notified1
Appears in Collections:Minerals Exploration Reports (MEX)

Files in this Report:
File SizeFormat Add to
Download
CR19670004.pdf7.01 MBPDF Add


Items in GEMIS are protected by copyright unless otherwise indicated.

Get Adobe Reader