Please note that there had been no separate processing reports provided.
Processing workflow is integrated into the SEGY headers and also copied here.


Applies to PSTM processing of 2D lines acquired by Geokinetics (2011) and Terrex (2012):

C11 **** PROCESSING SEQUENCE ****
C12 TRANSCRIPTION FROM SEGD TO FUGRO INTERNAL FORMAT.
C13 TRACE EDIT AND GEOMETRY HEADER UPDATE
C14 AMPLITUDE RECOVERY : SPHERICAL DIVERGENCE CORRECTION
C15 ZERO TO MINIMUM PHASE CONVERSION
C16 TIME FREQUENCY DENOISE AND SURFACE WAVE NOISE ATTENUATION
C17 STATICS : FLOATING DATUM CORRECTION. REFRACTION STATICS
C18 INT DATUM OF 325M AND BACK TO 0M USING VR 4500M/SEC
C19 CDP SORT + SURFACE CONSISTENT 24MS GAP DECONVOLUTION
C20 1ST PASS VELOCITY ANALYSIS + 1ST PASS RESIDUAL STATICS
C21 2ND PASS VELOCITY ANALYSIS + 2ND PASS RESIDUAL STATICS
C22 SCAMP
C23 CADZOW FILTER + COMMON OFFSET RANNA + BALANS + NMO LINEAR RADON
C24 PSTM 1 + 3RD PASS VELOCITY ANALYSIS
C25 PSTM 2
C26 NMO + ANGLE MUTE 7 TO 45 DEGREES + PRE-STACK AGC SCALING
C27 FLOATING DATUM CORRECTION : NEW TIME ORIGIN OF -300MS
C28 STACK

---

Applies to PSTM processing of 2D seismic lines acquired by WesternGeco (2012):

C25 PROCESSING: CORRELATION, GEOMETRY UPDATE & QC; MINIMUM PHASE FILTER;
C26 ANOMALOUS AMPLITUDE ATTENUATION & LINEAR NOISE ATTENUATION; RSCD: 24MS,
C27 OPER 240; SORT TO CMP; SJI STATIC CORRECTION; MISER; MBWP; MIG PREP
C28 KIRCH PRE-STACK TIME MIG (30 DEG); INV MO; MO (POST MIG VELS); T-X MUTE
C29 RMS GAIN; STACK; DATUM CORRECTION; RNA; DATUM TO MSL; SEGY                  
                   

---

Applies to PSDM processing:

C22 PROCESSING S
EQUENCE:

C23 INITIAL VELOCITY ESTIMATION ALONG 2D LINE

C24 PSDM
C25 
VELOCITY UPDATE ITERATIONS
C26 B
UILD PSEUDO 3D SURVEY

C27 BUILD INITIAL 3D VOLUME

C28 PSDM

C29 3D VELOCITY UPDATE

C30 PSDM

C31 1D CORRECTION

C32 POST STACK PROCESSING